Floplast
Solvent Weld Waste Bend Swept - 92.5 Deg - All Sizes
Solvent Weld Waste Bend Swept - 92.5 Deg - All Sizes
The option you have selected may be in short supply. To make an enquiry please call us on 020-3936-2839 or email us at sales@i4lgroup.co.uk.
SKU:WS14
Est Delivery between 6th Feb and
12th Feb.

Add £130 more to qualify for FREE delivery on your Floplast order
How much will I need?
We recommend adding 10% of additional product to the calculation to account for errors, damages, and obstacles in your project
Couldn't load pickup availability
Product Information
Solvent Weld Waste Swept bends are used to create a 92.5 degree change of direction in a waste pipe system. They have a longer radius than knuckle bends and the 92.5 degree angle promotes a self-cleansing flow.
To make a solvent weld joint, first ensure that the outer wall of the pipe and the inner wall of the fitting are both clean and free from grit or swarf. Apply SC250 solvent cement to both surfaces. Push the pipe fully into the fitting and give it a twist to ensure that full contact has been made. Clean off any excess solvent with a damp cloth and leave for 5 minutes to set. The installation should be left for 12 hours before testing.
This fitting is available in 32mm, 40mm and 50mm size options.
Our solvent weld waste is manufactured in the UK to BS EN 1455 and is kitemarked.
Key Features:
- Light weight yet strong
- Cost effective
- Extensive range of fittings to meet most installation requirements
- Made in ABS
- Requires solvent welding
Technical Specifications
Angle | 92.5° |
Brand | Floplast |
Guarantee | 1 Year Manufacturer Performance Guarantee |
Material type | ABS |
Specification | BS EN 1455 |
Datasheets
Delivery Information
Est Delivery between 6th Feb and
12th Feb.

Delivery will always take place on a weekday (Mon - Fri).
An exact delivery charge will be calculated at checkout based on your order.






