How To Board A Loft

If you're looking for a way to create more space in your home, then a loft conversion might be just what you need. By converting your loft into a usable space, you can increase the living space of your home without having to move or make any major structural changes. However, before you can start enjoying your newly converted loft, you'll need to learn how to board it properly. Here's a step-by-step guide on how to board a loft.

Step 1: Prepare the area

Before you start boarding your loft, you'll need to make sure that the area is clean and free of debris. This means removing any insulation or dust that may have accumulated over time. You should also check the loft for any signs of damage or damp, as these issues will need to be addressed before you can start boarding.

Step 2: Choose the right type of boards

When it comes to boarding your loft, there are a few different types of boards that you can use. The most common options are chipboard, plywood and OSB (oriented strand board). Each type of board has its own advantages and disadvantages, so it's important to choose the right one for your needs.

Step 3: Measure the area

Once you've chosen your boards, you'll need to measure the area that you'll be boarding. This will help you to determine how many boards you'll need and how much space you'll have to work with. Make sure to measure the width and length of the area, as well as the distance between the joists.

Step 4: Cut the boards

Using a saw, cut the boards to fit the area that you measured in the previous step. Be sure to cut the boards to the correct size, leaving a small gap around the edges to allow for expansion.

Step 5: Install the boards

Now it's time to start installing the boards. Begin by loft boards straight onto joists, making sure that it fits snugly. Nail the board in place using a hammer and nails, then repeat the process for the rest of the boards. Make sure to stagger the joints of the boards, as this will help to distribute the weight evenly.

Step 6: Finish the job

Once you've installed all of the boards, you'll need to finish the job by adding any necessary trim or edging. This will help to create a neat and tidy finish, while also helping to protect the edges of the boards from damage.