Rated ExcellentCladco Composite Wall Cladding Installation Guide
The guidance provided in this post is based on the expertise of Cladco, it is intended to provide general guidance on Composite Wall Cladding Installation.
Composite wall cladding has become an increasingly popular choice for homeowners and commercial property owners alike due to its durability, low maintenance, and aesthetic appeal. Cladco is one of the leading manufacturers of composite wall cladding, and their products are widely used across the UK.
If you've recently purchased Cladco Composite Wall Cladding and are looking for guidance on how to install it, you've come to the right place. In this post, we'll be providing you with a step-by-step guide on how to install Cladco Composite Wall Cladding.
Step 1: Preparing the Wall Surface
Before you begin installing the cladding, it is essential to ensure that the wall surface is clean, dry, and free from any obstructions. If there are any cracks or uneven surfaces, you should use a filler or leveling compound to smooth them out.
Step 2: Measuring and Cutting the Cladding Panels
Measure the height and width of the wall area that you want to cover with cladding panels. Cladco Composite Wall Cladding panels are available in standard sizes of 2.4m x 0.15m, and you can easily cut them to fit the required size using a circular saw or jigsaw. Make sure that you wear protective gear, such as gloves and goggles, while cutting the panels.
Step 3: Installing the Starter Strip
The starter strip is the first piece of Cladco Composite Wall Cladding that you need to install at the bottom of the wall. The starter strip is essential as it provides a level surface for the rest of the cladding panels to sit on. Use screws to fix the starter strip onto the wall, making sure that it is level.
Step 4: Installing the Cladding Panels
Once the starter strip is in place, you can begin installing the Cladco Composite Wall Cladding panels. Start at one end of the wall and work your way to the other end, making sure that each panel is level and securely fixed to the wall using screws. You should leave a small gap between each panel to allow for expansion.
Step 5: Installing the End Caps
After all the Cladco Composite Wall Cladding panels are installed, you need to install the end caps. The end caps are used to cover the exposed ends of the panels and provide a neat finish. Use adhesive or screws to attach the end caps to the panels.
Step 6: Finishing Touches
Once the cladding is in place, you can finish the job by sealing any gaps between the panels using silicone sealant. You can also paint or stain the cladding to match the colour scheme of your property.
Conclusion
Installing Cladco Composite Wall Cladding is a simple process that can be completed by anyone with basic DIY skills. Follow these steps, and you'll have a beautiful and durable wall cladding that will last for years to come. Remember to take all the necessary safety precautions while installing the cladding and use the appropriate tools and equipment.