Cart
Don't worry, you can adjust your order via the cart page before checking out!
Checkout Secure
For quickest response email us at sales@build4less.co.uk
Warmline:

PIR-Plywood Laminate - 76mm 1.2m x 2.4m

£58.00Ex. VAT.£69.60Inc. VAT.

Quantity
Checkout Secure

PIR-Plywood Laminate - 76mm 1.2m x 2.4m

£58.00Ex. VAT.£69.60Inc. VAT.

+ Add To Cart

.. Visitors Right Now

Warmline:

PIR-Plywood Laminate - 76mm 1.2m x 2.4m

£58.00Ex. VAT.£69.60Inc. VAT.

  • Due to the current situation there is a 3 week lead time on this product. If you would like to get in touch email us at sales@build4less.co.uk.
PPL-76
Sold in Quantities of 18
Standard Order Delivery

Introduction


QUINN-therm PlyDeck is a composite insulation board intended for forming warm flat roof decks which will be finished with partially bonded built-up felt waterproofing systems.

QUINN-therm consists of a core of PIR foam auto adhered to two composite aluminium facings. A layer of 6mm WPB plywood is bonded to the insulation to give additional strength and rigidity, and to provide a suitable substrate for partially bonded built-up waterproofing systems.

The low thermal conductivity of the insulation minimises the board thickness, while the composite board offers rapid coverage and straightforward installation. QUINN-therm PlyDeck is suitable for new build and refurbishment projects.

Warm roof construction reduces the risk of condensation within the roof structure and eliminates the need for ventilation beneath the deck: it also protects the structure from extremes of temperature.

Key Properties


QUINN-therm

  • does not readily absorb water, making it suitable for use in damp environments;
  • is light, robust and easy to handle; it may be worked using a saw or sharp knife;
  • is durable and will perform for the service life of the building.


Meeting Regulations


Meeting Regulations

* thickness of PIR board
** 6mm WPB plywood
Results based on roof construction of: 3 layer built-up felt roofing, QUINN-therm PlyDeck board, unvented low emissivity cavity, 12.5mm plasterboard. Calculations performed to EN ISO 6946:1997, taking account of repeating thermal bridges.



Design Notes

  • Stagger fixings for adjacent boards to the same joist or noggin.
  • Ensure screw heads finish flush with the surface of the plywood.
  • Minimise the period between installation of QUINN-therm PlyDeck and of the waterproofing system. In poor weather use polyethylene sheeting as temporary protection of QUINN-therm PlyDeck.


Installation Guidance


QUINN-therm PlyDeck can be installed on 50mm wide joists at 600mm max. centres on roofs intended for occasional maintenance traffic, or 400mm max. centres where more frequent traffic is expected.

QUINN-therm PlyDeck boards must be supported at all edges, including cut edges at penetrations: 50mm x 50mm cross noggins should be fitted between the joists. The boards must bear at least 20mm on all supporting timbers.

QUINN-therm PlyDeck should be fixed with low profile headed screws, long enough to give minimum 35mm embedment into the timbers. Fixings should be at 200mm centres around the board edges (300mm centres on any intermediate timbers) and set at least 10mm from board edges and 50mm from corners.

As 96mm is the maximum board thickness which is practicable to install over joists, U-values of 0.18 W/m2K and lower should be achieved by fitting additional QUINN-therm QR insulation between the joists.

Thermal bridging at roof-wall junctions must be avoided: at eaves and verges the joist space should be packed with insulation; at parapets vertical edge insulation should be applied to the inner face and the wall insulation carried at least 150mm above the surface of the QUINN-therm PlyDeck.

The foil facing on the underside of QUINN-therm PlyDeck has a very high vapour resistance and can be formed into a VCL by sealing the joints between boards, by setting the boards onto a wide (30mm) bead of vapour resistant sealant applied to the upper surface of all the joists and cross noggins.

Installation Sequence


  1. Plan the layout of QUINN-therm PlyDeck boards. Cut and fit cross noggins.
  2. Apply vapour resistant sealant in a 30mm wide strip to the upper surface of the joists and cross noggins.
  3. Lay QUINN-therm PlyDeck boards with long edges following joists and board edges in broken bond.
  4. Fix with screws at 200mm centres around board edges: 300mm at any other cross timbers.
  5. 5. Lay the waterproofing system.




Product Data




Performance Data



Brand Quinntherm
Coverage 2.88m2
Length 2400mm
Thermal conductivity 0.022 W/mK
Thickness 76mm
Width 1200mm
Delivery Info
 

Free Delivery T&C's

Free Delivery on all standard delivery orders when you spend over £300 ex. VAT.
This offer does not apply to special order items (read more below).

All orders under £300 ex. VAT incur a £25 ex. VAT delivery charge.


SPECIAL ORDER DELIVERY CHARGES

Build4Less go to great lengths to ensure each customer receives the lowest possible delivery charges for their purchase. We would like to give it to you free, and sometimes we can! However sometimes unfortunately we must charge for special order items to meet the additional charges imposed on us from various manufacturers.

Below you can view a list of all our Special Order delivery fees (excluding VAT)


Product Range Delivery Fee
Lead Flashing Rolls less than 100kg =£45 | between 101-499kg = £25 | above 499kg = FREE
EnviroBuild Furniture £125 per order. If your order of EnviroBuild Furniture exceeds £499 delivery is FREE
EnviroBuild (Other) £150 per order on EnviroBuild orders containing non furniture related products
ARC £35 per order
Ryno Orders under £300 incur an additional £20 delivery charge.
RynoTerrace Orders under £1000 incur an additional £75 delivery charge.
Clear Amber All Clear Amber products have a flat-rate £13.50 delivery charge
Clark-Drain less than 25kg = £35 | Over 25kg = £50 - Orders over 25kg only delivered to commercial properties
SISU Flooring £75 per order
Karma £50 per order
iKoustic £19.95 on orders under 20kg | £49 on orders under 200kg | £59 on orders under 900kg
H & H Acoustics £100 per order
Sheepwool £12 per pack
Building Blocks £25 delivery on orders under £200 | If order exceeds £200 delivery is FREE
Facing Bricks 1-4 bundles = £75 | 5-8 bundles = £150 | 9-12 bundles = £225 | 12+ bundles = Call to Inquire
Dalsan Skimcoat £50 per order

PRODUCT DELIVERY TIMES

The vast majority of our orders are dispatched within 2-4 working days. However, more speciality items or ordered in items may take a little longer to dispatch. For more accurate delivery times please contact us.

Celotex Next Day Delivery

Build4Less now offers Next Day Delivery on Celotex TB4000, GA4000, and XR4000 to the greater London area (within the m25). Order before 3pm to avail of this offer.The "Celotex Next Day Delivery" option is only available upon checkout on orders consisting of Celotex products only.

What happens next?

Once your order has been placed we will notify you by email approximately 12 to 48 hours later with a delivery date for your order. For items that have a longer lead time than 2 - 4 working days your delivery date notification email may take longer than 12 to 48 hours. Orders are only processed for delivery between 8.00am and 5pm Monday to Friday excluding bank holidays. Build4less strongly advises not to book any tradesmen to do your work until after your material has been delivered to you, on rare occasions delays may happen that are out of our control which could result in a delay delivering material to site.

Please ensure there is a means of offloading your order on-site (unless otherwise agreed with Build4less). Always check your delivery is correct when it arrives before you unload and sign for your order.

For any further questions or queries please feel free to contact us on 0203 582 6399 or just email deliveries@build4less.co.uk. Our phone lines are open Monday - Friday from 8.30am to 5pm.

CHECKING DELIVERY TIMES

If you wish to check the delivery time of your order on the day of delivery please email deliveries@build4less.co.uk and please provide your order number. One of our dispatch team will then give you an eta by email where possible as to when you can expect delivery. Please note this is just an eta only and is not an exact time of delivery as delays can occur from when an order leaves our warehouse to when it arrives with the customer. build4less will try to be as accurate as possible with given eta's.

ORDER TRACKING

Check the progress on your order by emailing:deliveries@build4less.co.uk
Please note: Deliveries are made to the address supplied to us. If orders are returned to us by the carriage company we may make an additional delivery charge for re-dispatch.

MAINLAND UK

All our orders are dispatched using a local delivery service, for remote regions within the mainland UK or special delivery requests your order maybe dispatched with a courier or haulage company with a tracking number. There may be an additional charge for this courier service but you will be notified before dispatch of this if you wish to proceed. Some remote areas in North/North West Scotland and West Wales may not be covered in our free delivery or standard lead time terms. If delivery is required to these areas or similar remote areas outside the reach of our distribution please contact us before ordering to confirm lead times and whether we can ship under standard rates.

Product Reviews

Introduction


QUINN-therm PlyDeck is a composite insulation board intended for forming warm flat roof decks which will be finished with partially bonded built-up felt waterproofing systems.

QUINN-therm consists of a core of PIR foam auto adhered to two composite aluminium facings. A layer of 6mm WPB plywood is bonded to the insulation to give additional strength and rigidity, and to provide a suitable substrate for partially bonded built-up waterproofing systems.

The low thermal conductivity of the insulation minimises the board thickness, while the composite board offers rapid coverage and straightforward installation. QUINN-therm PlyDeck is suitable for new build and refurbishment projects.

Warm roof construction reduces the risk of condensation within the roof structure and eliminates the need for ventilation beneath the deck: it also protects the structure from extremes of temperature.

Key Properties


QUINN-therm

  • does not readily absorb water, making it suitable for use in damp environments;
  • is light, robust and easy to handle; it may be worked using a saw or sharp knife;
  • is durable and will perform for the service life of the building.


Meeting Regulations


Meeting Regulations

* thickness of PIR board
** 6mm WPB plywood
Results based on roof construction of: 3 layer built-up felt roofing, QUINN-therm PlyDeck board, unvented low emissivity cavity, 12.5mm plasterboard. Calculations performed to EN ISO 6946:1997, taking account of repeating thermal bridges.



Design Notes

  • Stagger fixings for adjacent boards to the same joist or noggin.
  • Ensure screw heads finish flush with the surface of the plywood.
  • Minimise the period between installation of QUINN-therm PlyDeck and of the waterproofing system. In poor weather use polyethylene sheeting as temporary protection of QUINN-therm PlyDeck.


Installation Guidance


QUINN-therm PlyDeck can be installed on 50mm wide joists at 600mm max. centres on roofs intended for occasional maintenance traffic, or 400mm max. centres where more frequent traffic is expected.

QUINN-therm PlyDeck boards must be supported at all edges, including cut edges at penetrations: 50mm x 50mm cross noggins should be fitted between the joists. The boards must bear at least 20mm on all supporting timbers.

QUINN-therm PlyDeck should be fixed with low profile headed screws, long enough to give minimum 35mm embedment into the timbers. Fixings should be at 200mm centres around the board edges (300mm centres on any intermediate timbers) and set at least 10mm from board edges and 50mm from corners.

As 96mm is the maximum board thickness which is practicable to install over joists, U-values of 0.18 W/m2K and lower should be achieved by fitting additional QUINN-therm QR insulation between the joists.

Thermal bridging at roof-wall junctions must be avoided: at eaves and verges the joist space should be packed with insulation; at parapets vertical edge insulation should be applied to the inner face and the wall insulation carried at least 150mm above the surface of the QUINN-therm PlyDeck.

The foil facing on the underside of QUINN-therm PlyDeck has a very high vapour resistance and can be formed into a VCL by sealing the joints between boards, by setting the boards onto a wide (30mm) bead of vapour resistant sealant applied to the upper surface of all the joists and cross noggins.

Installation Sequence


  1. Plan the layout of QUINN-therm PlyDeck boards. Cut and fit cross noggins.
  2. Apply vapour resistant sealant in a 30mm wide strip to the upper surface of the joists and cross noggins.
  3. Lay QUINN-therm PlyDeck boards with long edges following joists and board edges in broken bond.
  4. Fix with screws at 200mm centres around board edges: 300mm at any other cross timbers.
  5. 5. Lay the waterproofing system.




Product Data




Performance Data



Delivery Info
 

Free Delivery T&C's

Free Delivery on all standard delivery orders when you spend over £300 ex. VAT.
This offer does not apply to special order items (read more below).

All orders under £300 ex. VAT incur a £25 ex. VAT delivery charge.


SPECIAL ORDER DELIVERY CHARGES

Build4Less go to great lengths to ensure each customer receives the lowest possible delivery charges for their purchase. We would like to give it to you free, and sometimes we can! However sometimes unfortunately we must charge for special order items to meet the additional charges imposed on us from various manufacturers.

Below you can view a list of all our Special Order delivery fees (excluding VAT)


Product Range Delivery Fee
Lead Flashing Rolls less than 100kg =£45 | between 101-499kg = £25 | above 499kg = FREE
EnviroBuild Furniture £125 per order. If your order of EnviroBuild Furniture exceeds £499 delivery is FREE
EnviroBuild (Other) £150 per order on EnviroBuild orders containing non furniture related products
ARC £35 per order
Ryno Orders under £300 incur an additional £20 delivery charge.
RynoTerrace Orders under £1000 incur an additional £75 delivery charge.
Clear Amber All Clear Amber products have a flat-rate £13.50 delivery charge
Clark-Drain less than 25kg = £35 | Over 25kg = £50 - Orders over 25kg only delivered to commercial properties
SISU Flooring £75 per order
Karma £50 per order
iKoustic £19.95 on orders under 20kg | £49 on orders under 200kg | £59 on orders under 900kg
H & H Acoustics £100 per order
Sheepwool £12 per pack
Building Blocks £25 delivery on orders under £200 | If order exceeds £200 delivery is FREE
Facing Bricks 1-4 bundles = £75 | 5-8 bundles = £150 | 9-12 bundles = £225 | 12+ bundles = Call to Inquire
Dalsan Skimcoat £50 per order

PRODUCT DELIVERY TIMES

The vast majority of our orders are dispatched within 2-4 working days. However, more speciality items or ordered in items may take a little longer to dispatch. For more accurate delivery times please contact us.

Celotex Next Day Delivery

Build4Less now offers Next Day Delivery on Celotex TB4000, GA4000, and XR4000 to the greater London area (within the m25). Order before 3pm to avail of this offer.The "Celotex Next Day Delivery" option is only available upon checkout on orders consisting of Celotex products only.

What happens next?

Once your order has been placed we will notify you by email approximately 12 to 48 hours later with a delivery date for your order. For items that have a longer lead time than 2 - 4 working days your delivery date notification email may take longer than 12 to 48 hours. Orders are only processed for delivery between 8.00am and 5pm Monday to Friday excluding bank holidays. Build4less strongly advises not to book any tradesmen to do your work until after your material has been delivered to you, on rare occasions delays may happen that are out of our control which could result in a delay delivering material to site.

Please ensure there is a means of offloading your order on-site (unless otherwise agreed with Build4less). Always check your delivery is correct when it arrives before you unload and sign for your order.

For any further questions or queries please feel free to contact us on 0203 582 6399 or just email deliveries@build4less.co.uk. Our phone lines are open Monday - Friday from 8.30am to 5pm.

CHECKING DELIVERY TIMES

If you wish to check the delivery time of your order on the day of delivery please email deliveries@build4less.co.uk and please provide your order number. One of our dispatch team will then give you an eta by email where possible as to when you can expect delivery. Please note this is just an eta only and is not an exact time of delivery as delays can occur from when an order leaves our warehouse to when it arrives with the customer. build4less will try to be as accurate as possible with given eta's.

ORDER TRACKING

Check the progress on your order by emailing:deliveries@build4less.co.uk
Please note: Deliveries are made to the address supplied to us. If orders are returned to us by the carriage company we may make an additional delivery charge for re-dispatch.

MAINLAND UK

All our orders are dispatched using a local delivery service, for remote regions within the mainland UK or special delivery requests your order maybe dispatched with a courier or haulage company with a tracking number. There may be an additional charge for this courier service but you will be notified before dispatch of this if you wish to proceed. Some remote areas in North/North West Scotland and West Wales may not be covered in our free delivery or standard lead time terms. If delivery is required to these areas or similar remote areas outside the reach of our distribution please contact us before ordering to confirm lead times and whether we can ship under standard rates.

Brand Quinntherm
Coverage 2.88m2
Length 2400mm
Thermal conductivity 0.022 W/mK
Thickness 76mm
Width 1200mm